Apr 22, 2017 · My new Spektrum AR8010T telemetry receiver has some problems. 1. The receiver will not bind unless the remote receiver is attached to the main unit. A personal discussion with Horizon Hobby technical advisor states, "Yes, this is normal." What kind of receiver has to have a satellite receiver to work? 2.

May 14, 2017 · I just wanted to register my AR8010T RX on the webside. So in a dropdown menu i can choose amongst all the products and i choose on AR8010T but it wants me to put in a serial in the field just below and i dont know how to find the serial on the AR8010T. I know how to do in on my transmitter .. via the menus and all - no problem there.

Feb 13, 2017 · AR8010T SRXL successful setup! My SRXL set up works but I've had to run channel 0 to Aux 2 to be able to get my gyro gain on my DX8 gear switch to activate rescue. I've also tried unsuccessful to run my throttle cable from Spirit for output signal to ESC, I needed to use the RX throttle connection instead which isn't a problem I just expected ...

Apr 30, 2017 · Hi everybody, I recently brought 2 new spektrum receiver with build Telemetry, AR6600T & AR8010T. I'm very happy with the AR6600T on my quad until yesterday. I am building myself a hex, and put the AR8010T on it. After connected everything, motor, ESC, FC and AR8010T, plug battery, bind it.

Mar 10, 2021 · During the “receiver menu” setup on the Microbeast Plus, the AR8010T will be detected properly as a single-line receiver using that configuration. One helpful hint if you decide to use this combination: When the Microbeast Plus is attempting to detect the AR8010T during the initial receiver setup, I've found it helps to move the sticks ...

Oct 22, 2018 · I use the AR8010T on my Trex 700N only because I wanted to replace my TM1000 and use SRXL. I could have used the SPM4649T on my Trex 700N and kept the TM1000. As I understand it, Spektrum's SPM4649T is a "dual diversity" receiver that is similar technology / protocol as has been used by Futaba and Jeti for quite some time.

Feb 21, 2017 · Hi, Neewbie here looking for some help setting up a GY401 with a newly purchased AR8010T receiver, Model shop advises if due to insufficient frame rate on the GY401. I have no rudder movement and gyro wont initialise on start up. I've swapped rudder servo to rule that out and checked gyro on another heli. If I plug an Align GP780 all works okay ?

Jun 5, 2017 · On mine, the AR8010T SRXL replaced a TM1000 + 2 Spectrum sats connected to the Brain 2. One the AR8010, I use 3 remote sats + the internal RX. The AR8010T gives me the Fades, Frame loss & Hold details I couldn't get from the Brain 2 in real time. And, I get the Temp, RX voltage, External Voltage and RPM that I was getting from the TM1000.

May 15, 2017 · Guys, I've read this thread and it's been useful. I have a Spektrum DX8 and an AR8010T receiver that work perfectly with the exception of via SRXL. I'd really like to get the SRXL functionality operational so that I can use the governor function on my Microbeast v4.2 which isn't available using the receiver in other than via SRXL. It's a TREX 550X.

Oct 25, 2017 · Until now, all of my planes have been 6 channel or less and happy with AR610s. I recently got a couple of new Spektrum AR8010T receivers and found the manual to be less than helpful. I have never had to set up an Rx with a remote. 1) The Rx itself has three ports just to the side of the bind button.