
50 Ohm Coax Cable - 9913F7 - Belden
Actual Impedance specification is 51.5 +/- 2 ohms. Max. Pull Tension.
BELDEN, 9913F-7, Cables Coaxial, 9913F7 - Ham Radio Outlet
Low Loss, 10 AWG stranded (7x19) .108" bare copper conductor, gas-injected foam HDPE dieletric insulation, Duobond II ® + tinned copper braid shield (95% coverage), Belflex® jacket. Attenuation equal to Times Microwave’s LMR-400-UF through 1.8 GHz and close thereafter.
All sales of Belden products are subject to Belden's standard terms and conditions of sale. Belden believes this product to be in compliance with all applicable environmental programs as listed in the data sheet.
Reviews For: Belden 9913F low loss Coax - eHam.net
Once again for the benefit of any new hams who may be reading this 9913F is a modern version of the old 9913 air dielectric coax, Like LMR400 it's now a foam dielectric coax which is easily identified by it's tinned braid and bonded foil shield. 9913F is no more and no less susceptible to water intrusion/migration than competing products.
Belden 9913F RG-8U - 50 OHM Low Loss / High Flex 125 FT ...
“The Bottom Line”: 9913F7 has almost exactly the same physical and electrical assets (size, flexibility, low attenuation) of LMR-400UF, with the added advantage of lower replacement cost due to longer life.
9913F7 - 50 Ohm Transmission Cable | Belden
Actual Impedance specification is 51.5 +/- 2 ohms. Max. Pull Tension:
Reviews For: Belden 9913 - eHam.net
I feed it with 7/8" CATV hardline and above the rotor, I went with 9913F. Yes, this coax is MUCH better. Multiple strand center conductor, foam dielectric, etc. The original 9913 was a great concept, but it had it's limitations. Time Owned: more than 12 months.
Belden 9913F High Flex Low Loss RG-8 Coax Cable - 10 AWG …
Belden 9913F High Flex Low Loss RG-8 Coax Cable (Black) Features & Benefits: 10 AWG solid .108" bare copper conductor; Semi-solid polyethylene insulation; Duobond II® + tinned copper braid shield (90% coverage) PVC jacket
9913F Coax - Radio Pro Shop
RG-8/U type, 10 AWG stranded (7x19) .108" bare copper conductor, gas-injected foam HDPE insulation, Duobond II ® + tinned copper braid shield (95% coverage), Belflex® jacket. Double Shielded! Max. Recommended Pulling Tension: Specifications are …
Belden provides the information and specifications herein on an "ASIS" basis, with no representations or warranties, whether express, statutory or implied.