May 20, 2005 · By default, a Catalyst 3750 switch PoE port automatically provides power when a valid powered device is connected to it. For information about configuring and monitoring PoE ports, see the switch software configuration guide.

Aug 10, 2007 · Note If you have stacked Catalyst 3750-X switches, connect to the 10/100 Ethernet management port or console port of one of the stack switches. You can perform the initial configuration for the entire stack on any switch in the stack. Use one of these options to access the CLI: The RJ-45 console port is on the rear panel of the switch.

Nov 27, 2023 · You can configure the Catalyst 4500/4000 series switches from a direct console connection to the console port. Use the RJ-45-to-RJ-45 rollover cable and RJ-45-to-DB-9 female DTE adapter (with the label Terminal ) to connect the console port to a PC that runs terminal emulation software.

Feb 3, 2014 · I'm trying to configure a Catalyst 2960 Series PoE-24 by the console port using the hyperterminal, but it's not working. I verified the cable and the COM port, and everything works with another switch (same model). Does anyone knows what could possibly be happening? 02-04-2014 05:50 AM.

Aug 4, 2014 · Once you have the right COM Port number just use the default settings in Putty. You may find the COM Port is locked up which will require a reboot. Hello. I have one Cisco Catalyst 3750 switch, and two 2950 switches. I am trying to reset their settings using a console cable with a trendnet Ethernet to USB adapter.

May 18, 2006 · Does anyone know if the console speed of a Catalyst 3750 can be changed? The switch does not have a valid IOS image installed and the only prompt accessible is the Switch: recovery console prompt. Before using the xmodem I am hoping there is a way to increase the baud rate to speed things up a bit. 05-18-2006 05:13 AM. It available witout a login.

To connect the switch console port to a PC, use the supplied RJ-45-to-DB-9 adapter cable. Note If you have stacked your switches, connect to the console port of one of the switches in the stack. The initial configuration for the entire stack can be performed on any switch in the stack.

You can access the CLI on a configured or unconfigured switch by connecting the console port of the switch to the serial port on your PC or workstation and accessing the switch through a Telnet session.

Discover the functionality of the Cisco 3750X console port in our comprehensive switch manual. Get detailed insights today!

Mar 7, 2014 · Here are the instructions for connecting a Console port to a PC. If the cabling configuration is correct, it may be the COM port device setup. From that page: SYMPTOM: No connection. Check your laptop's settings to see if COM1 is loaded. Click on Start > Settings > Control Panel. Within the Control Panel window, open the Systems icon.