ISO-VG viscosity grades for industrial lubricants. The diagram below indicates the minimum and maximum viscosities in centistokes for equivalent ISO-VG grades at temperature 40 o C. ISO VG stands for "International Standards Organization Viscosity Grade" …

Purpose of the ISO VG System. The purpose of the ISO system of classifying viscosity grades is to establish a viscosity measurement method so that lubricant suppliers, equipment designers and users will have a common (standardized) basis for designating or …

Antiwear hydraulic oils are formulated from the highest-quality base fluids and unique additive technologies to prevent wear and tear on hydraulic systems. ISO VG 100 oil has a midpoint kinematic viscosity of 100 mm2/s, also referred to as centistokes (cSt).

Jul 26, 2018 · ISO VG stands for “International Standards Organization Viscosity Grade” and is reported in numbers ranging from 2 all the way up to 1500. This number is critical because a lubricant’s viscosity is the single most important factor …

ISO VG 100/SAE 30/AGMA 3 lubricants for industrial and (few) automotive applications are commonly employed in hydraulic systems, moderately-loaded and heavily-loaded gearboxes, food industry machinery, slide ways, and some air and gas compressors.

The result is known as the International Standards Organisation Viscosity Grade - ISO VG. This classification applies mainly for use with industrial lubrication. The viscosity of each grade ranges ± 10 % from the mid-point.

May 30, 2023 · ISO VG calculates oils at 40ºC; a given range is +/-10% of their stated value. So an ISO VG 100 has a viscosity between 90 and 100 cSt at 40ºC. On the contrary, SAE measures oil at 100ºC.

The ISO viscosity grade (VG) as specified in ISO 3448, is commonly used to classify oils. (See Table 1) Viscosity at 10°F (40°C), the approximate temperature of machinery, in centistokes (same as mm 2 /s), is used as the index.

ISO viscosity classification system or ISO Viscosity grades also called ISO VG contains 18 viscosity grades. ISO VG are based on kinematic viscosity of the lube oil/fluid at 40°C. The ISO system is primarily used for hydraulic oil, industrial oils, …

This product has inhibitors of corrosion and water displacement and it ensures the protection of the hydraulic systems. It is formulated for use in high pressure hydraulic systems, in all mobile and stationary equipment’s, operating under severe working conditions.