Jun 23, 2016 · this tether is also working from a wifi-router > Galaxy S7 USB cellphone > the Linux router > a real router > my intranet. but the wifi script can also be used if you don't want the cell-phone doing the wifi-usb routing. >>> tether: dhclient -r usb0 dhclient usb0 iptables -F iptables -P INPUT ACCEPT iptables -F INPUT iptables -P OUTPUT ACCEPT

Jan 29, 2013 · You have stored the file into memory stick on a Windows machine. Log into the Linux machine and plug in the stick. What happens next is that the graphical desktop should notice the hotplug of USB device and do something. Trouble is, there are alternative desktops available and I have not used the default one.

Apr 27, 2010 · From the internet I have a modem-192.168.2.1, a telecom voip box-192.168.15.1, and then my router 192.168.1.1 I'm able to ping machines attached to the router but nothing beyond that. I tried to get the results for ifconfig via putty on this machine but it says command not found. I can get it when I log in at the box in question though. Thanks, TOG

Feb 10, 2009 · The DR CD is a very cut-down version of Linux with just enough on it to boot the CD, load up Acronis software on the local PC, connect via Ethernet and communicate with the NAS. I've tried these tests by disconnecting the Router, I've used by DHCP and static IP addresses on the local interface (eth0) and I get the same results.

Dec 27, 2010 · - you want your Linux server to serve LAN and internet That's ok, because the only thing that will block your Linux server from internet is Router, which I don't know which model/make it is, but essentially all routers have options to open ports to specific IP (NAT - …

Feb 28, 2015 · You puchase an ADSL modem/router and connect the CentOS machine to a LAN port on the modem with an Ethernet cable. The modem/router takes care of establishing the ADSL connection, there's nothing you need to setup on the CentOS system. If you need to change settings on the modem, see the modem's instructions or talk to your ISP.

When I tracert the destination IP address the first hop is listed as the internal router. Why would linux not obey the route and send it to the external router? Even more curious, when I remove the internal network entirely from the configuration tracert STILL tries to send this traffic to the internal router. The tracert:

Nov 21, 2009 · One of the jobs I often deploy Linux machines to do is to act as a transparent firewall router between the main network at the ISP's communication router. When doing this I tend to end up needing to configure two NICs with the same IP address, one connected to the router, the other to the rest of the network.

Feb 27, 2013 · eth0 is directly connected to internet router and eth1 is connected to switch eth0 ip 192.168.1.4 eth1 ip 192.168.1.5 please help me how i configure squid i am new on centos anybody know how it will configured regards

Dec 16, 2008 · This is first time I am using linux-CentOS 5.0 and have some problems with connecting to internet. I am runing Windows XP sp3 and I install CentOS 5(ghost) on VirtualBox. Everything runs fine just I cant connect to the internet.