It is with great sadness that I announce that Discmounts will officially close on Dec. 31 2024. After 20+ years, hundreds of new friends and all the fun Discmounts has given me, it is time to say goodbye.

DM-6/DM-4 DiscMounts' mount head specification: (All specifications are subject to change without notice.) Azimuth axis (Tripod) mounting hole: ... 5/16" - 18 spaced 3" apart centered on 6" disc DM-4: 1/4 " - 20 spaced 3" apart centered on 4 " disc DM-6 Angle adaptor mounting holes: #10-32 spaced 1.5" apart Material: All aluminum is 6061-T6 ...

•Azimuth axis (Tripod) mounting hole: 3/8”-16 centered on 6” disc. •Altitude axis mounting holes: 5/16” - 18 spaced 3” apart •Weight (no options, no saddle plate): 16.2 lbs.

DM-6 Alt-Azimuth mount. Head only. SPECS: Please refer to Specification page for all information. Includes manual and adjustment wrench. $1450.00 *This friction based Alt-Azimuth mount is protected under Patent 7382533 and cannot be copied for any reason including personal use and/or retail.

OVERVIEW:. DM-4 Standard Tripod. Has hand rubbed oil finish and ridged aluminum perimeter strapping. Rigidly handles up to 20 pound telescopes. SPECS:

The DiscMount was designed with Patented Variable Friction Control along with a large friction disc. This allows the mount to be adjusted to accommodate large changes in eyepiece (or camera) weights. All that is needed is to adjust the mount to accommodate for the telescope configuration, and forget it.

It is also very easy to mount the telescope so that it is orthogonal. 5- Direct mounting of encoders (when used) allows easier mounting and greater position precision. Since the center shafts terminate at the edge of the disc, the encoders can be mounted directly to the shaft end.

DM-6 DSC Kit with DCS mount & Eyepiece tray - 10k encoders, internal cabling and Angled DSC mount and DM's eyepeice tray. All you need to make your DM-6 PUSH-TO READY. Installed and tested.

OVERVIEW: DM-6 Standard Tripod. Has hand rubbed oil finish and ridged aluminum perimeter strapping. Rigidly handles up to 25 pound telescopes.

The 4” Tilt-in Saddle-3 allows the use of the 4” Dovetail Converter. Mount on the Tilt-in Saddle and use your 1.5” to 2” wide dovetail plates. COMPATABILITIES: Losmandy “D” Series (G-11) Dovetail plates. DiscMounts' 7" & 9" Dovetail plates. DiscMounts' 8" X 1.9" Slotted Dovetail plate (with 4" Dovetail converter)